Economical Polypropylene Pleated Filter Cartridges

High Contaminant Holding Capacity

Non-Fiber Releasing

Wide Chemical Compatibility

Rigid Polypropylene Outer Cage Protects Filter

100% Polypropylene Construction, Suitable for Filtration of wide range of aggressive

chemicals and solvents

Submicron Prefilter for Final Membrane Application

Fast Rinse-Up to 18 Megohm-cm

Retention Ratings:

0.1, 0.2, 0.45, 0.65, 0.8, 1, 2, 3, 5, 10, 20, 30, 50, 75 μm

Maximum Differential Pressure:

70psid @ 68℉ (4.8bar @ 20℃)

36psid @ 150℉ (2.5bar @ 65℃)

Recommended Change out Differential Pressure: 35psid (2. 0 bar)

Purity:

PPP Series filter cartridges are free of surfactants, anti-static agents, binders, and adhesives.

Sterilization:

Multiple autoclaving for 30 minutes at 121℃ under no end load conditions.

Materials of Construction:

Filter Media: Pleated Polypropylene

Endcaps: Polypropylene

Extended Core*: Polypropylene

Gaskets/O-rings*: Silicone, Buna N, Viton A, EPDM, T = PTFE

Dimensions (nominal):

Outside Diameter: 2.7″ (68mm)(nominal)

Lengths: 5’, 250mm, 10”(254 mm), 500mm, 20”(508mm), 750mm, 30”(762 mm), 1000mm, 40”(1020mm),

50”(1270 mm), other special available.

 chemical

 water

 Solvents