Product Details
|
Fulfl o® ParMax SELECT Filter Cartridges
编号：
ParMax Select cartridges are available
with polypropylene pleated depth
media and microfiberglass media in
absolute (99.98%) ratings from
1 to 90 microns.
with polypropylene pleated depth
media and microfiberglass media in
absolute (99.98%) ratings from
1 to 90 microns.
ParMax™ Select High Flow Cartridge
The best of pleated and large diameter technologies are combined
in Parker’s ParMax Select high flow filter cartridges. The unique layered
construction and staged pleating
provide improved dirt holding capacity
and retention across a wide range
of flux rates. One six-inch diameter
cartridge can handle up to 500gpm
flow (60” length). The inside to outside
flow allows for a high contaminant
holding capacity and a long filter life
which makes the ParMax Select an
ideal choice for a wide variety of critical
process applications.
ParMax Select cartridges are available
with polypropylene pleated depth
media and microfiberglass media in
absolute (99.98%) ratings from
1 to 90 microns.
Benefi ts
• Large diameter yields much higher
flow rates compared to traditional 2.5”
filters.
• High flow capacity allows for fewer elements
and less capital expenditure.
• Cartridge is 100% thermally welded.
• Inside-out flow pattern ensures positive
capture of contaminants.
• Absolute retention ratings for
critical filtration.
Fulfl o® ParMax SELECT
Filter Cartridges
C - 2 0 6 4
• All materials listed as acceptable for
potable and edible contact according
to CFR Title 21.
• Manufactured with strict quality
control.
• Parker Process Filtration Division is
an ISO9001:2000 Certified Division.
Applications
• Process Water
• Power Generation
• Specialty chemicals
• Food and Beverage
Materials of Construction:
• Media:
RSCP - Polypropylene
RSMG - Microfi berglass
• Support/Drainage:
Polypropylene
• Hardware: Polypropylene
• O-Rings (SOE):
EPR, Buna-N, Viton®, Silicone
Retention Ratings (99.98%):
• 1, 3, 4, 5, 10, 20, 30, 40, 90**
With Select Pleating, there is more open area on
the inside of the cartridge for additional
contaminant-holding capacity.
Dimensions (nominal):
Outside Diameter: 6.0˝ (15.24 cm)
Inside Diameter: 2.9˝ (7.36 cm)
Maximum Operating
Conditions:
• Maximum Temperature:
176ºF (80ºC) @ 30psid (2.1bar)
• Maximum Differential Pressure:
70psi (4.8bar) @ 77ºF (25ºC)
30psi (2.1bar) @ 176ºF (80ºC)
Recommended Operating Conditions:
• Flow Rate:
Up to 175gpm (662 LPM)/
20˝ element
Up to 350gpm (1325 LPM)/
40˝ element
Up to 500gpm(1892 LPM)/
60˝ element
• Change-out Pressure:
35psid (2.41bar)
