Product Details
|
Advantage™ PF Filter Cartridges
编号：
Double the Flow With Next
Generation PTFE Membrane
Filter Cartridges
Generation PTFE Membrane
Filter Cartridges
Double the Flow With Next Generation PTFE Membrane Filter Cartridges
Ultra-Pure PTFE membrane filter cartridges perform at the
highest flow rate to provide the cleanest fluids at the lowest
possible cost. Parker’s unique PTFE membrane construction
serves as a low-cost alternative to all fluoropolymer
cartridges in less aggressive applications and maintains
broad chemical compatibility with low extractable levels and
high particle retention rates.
The Ultra-Pure PTFE Membrane Series is available in
0.1μm, 0.2μm, 0.45μm and 1μm pore sizes.
Applications
Pharmaceutical
■ Tank Vents
■ Filtration of
Compressed Gases
■ Filtration of
Solvents
Process Gases
■ Bulk and Pointof-
Use Gases
■ Compressed Air
Food and Beverage
■ Sterile Venting of Holding
Tanks
■ Sterile CO2 Filtration
■ Microbial Control of Inlet
Air for Bioprocessing of
Foods
Chemicals
■ Solvents
■ Bulk Filling
■ Acids
Features and Benefits
Superior PTFE Membrane Yields
Maximum Filtration Results
■ High flow rates and optimized surface area reduce
processing time and filter consumption.
■ Rinsed with 18 megohm-cm UHP water for high purity.
■ Non-fiber releasing.
■ All-polypropylene component construction complemented
by a variety of O-ring seals withstands demanding
operating parameters.
■ Narrow pore size distribution ensures the ultimate in
retention and flow rate.
■ Naturally hydrophobic membrane maintains air flow
rates in venting and gas applications.
■ Available prewetted for immediate use in process.
Parker’s TQM System Assures Consistent
Performance and Reliable Filtration
■ Strict quality control measures include rigorous testing
for rinse up, shedding, flow rate and extractable levels.
■ Integrity-tested and testable in situ.
■ Thermally welded, eliminating adhesive extractables.
■ Biosafe in accordance with USP Class VI-121°C
Plastics Tests.
■ Specifically designed to ensure cleanliness.
■ All materials of construction are FDA listed as
acceptable for potable and edible liquid contact
according to CFR Title 21.
Specifications
Materials of Construction:
■ Membrane: hydrophobic PTFE
■ Membrane Support/Drainage:
polypropylene
■ Structural Components:
polypropylene
■ Seal Material: various
■ Sealing Method: thermal welding
Dimensions:
■ Diameter: 2.7 in (6.8 cm)
■ Lengths: 10-40 in (25-102 cm)
Surface Area (10 in cartridge):
■ Minimum 7.5 ft2 (0.7 m2)
Endotoxins:
■ < 0.25 EU/ml
Integrity Test:
■ Bubble Point (100% IPA):
0.1μm > 24 psig (1.7 bar)
0.2μm > 16 psig (1.1 bar)
0.45μm > 6 psig (0.4 bar)
1μm > 3 psig (0.2 bar)
Recommended Operating Conditions:
■ Maximum Temperature:
176°F (80°C) @ 30 ΔP (2.1 bar)
■ Maximum Differential Pressure:
Forward:
70 psi (4.8 bar) @ 77°F (25°C)
30 psi (2.1 bar) @ 176°F (80°C)
Reverse:
50 psi (3.4 bar) @ 77°F (25°C)
Sterilization/Sanitization Methods:
■ Autoclave or in situ Steam:
250°F (121°C) for 30 minutes at
15 psi (1.0 bar)
■ 70% IPA
■ 10% Hydrogen Peroxide
