Product Details
|
SAYES HF Series High Flow Filtration System
The best of pleated and large
diameter technologies are combined in
SAYES HF series high flow filter cartridges
The unique layered construction and
staged pleating provide improved dirt
holding capacity and retention across a
wide range of flux rates.
diameter technologies are combined in
SAYES HF series high flow filter cartridges
The unique layered construction and
staged pleating provide improved dirt
holding capacity and retention across a
wide range of flux rates.
SAYES HF Series High Flow Filtration System
The best of pleated and large
diameter technologies are combined in
SAYES HF series high flow filter cartridges
The unique layered construction and
staged pleating provide improved dirt
holding capacity and retention across a
wide range of flux rates. One six-inch
diameter cartridge can handle up to 500
gpm flow (60" length). The inside to outside
flow allows for a high contaminant holding
capacity and a long filter life which makes
the Sayes HF an ideal choice for a wide
variety of critical process applications.
Sayes HF cartridges are available with
polypropylene pleated depth media and
microfiberglass media in absolute (99.98%
ratings from 1 to 90 microns.
Benefits
Benefits • Large diameter yields much higher
flow rates compared to traditional
2.5" filters.
• High flow capacity allows for
fewer elements and less capital
expenditure.
• Cartridge is 100% thermally welded.
• Inside-out flow pattern ensures
positive capture of contaminants.
• Absolute retention ratings for
critical filtration.
• Manufactured with strict
quality control.
Applications
• Process Water
• Power Generation
• Specialty chemicals
• Food and Beverage
Materials of Construction:
• Media:
HFP - Polypropylene
HFG - Microfiberglass
•Support/Drainage:
Polypropylene
• Hardware: Polypropylene
• O-Rings (SOE):EPR, Buna-N,
Viton*, Silicone
Retention Ratings (99.98%):
• 1, 3, 4.5, 10, 20, 30, 40, 70,
100
Dimensions (nominal):
Outside Diameter: 6.0” (15.20 cm)
Inside Diameter: 2.5” (6.35 cm)
Maximum
Operating
Conditions:
•Maximum Temperature:
176ºF (80ºC) @30 psid (2.1
bar)
• Maximum Differential Pressure:
70 psi (4.8 bar)@ 77ºF (25ºC) 30
psi (2.1 bar)@ 176ºF (80ºC)
Recommended Operating
Conditions:
• Flow Rate:
Up to 175 gpm (662 LPM)/
20” element
Up to 350 gpm (1325 LPM)/
40” element
Up to 500 gpm(1 892 LPM)/
60” element Change-out
Pressure: 35 psid (2.41 bar)
