中英文切换
全站搜索
产品检索
产品详情
ZHFT/2C ZHFT-3C
HIGH FLOW TETPOR II is validated as a 0.2 micron sterilizing grade filter in liquids through ASTM F838-05 and in gas through full retention to an aerosol challenge of MS2 phage. This ensures the filter will guarantee the sterility of your process in the worst-case scenario where the filter may be subjected to bulk liquid due to a process problem.

市场

Life Sciences

微胶粒等级(ΜM)

0.2

过滤装置

Pleated

介质

PTFE

预滤器材料

None

功能

Sterile filtration/Microbial control

工业标准

21 CFR Part 177 and current USP Plastics Class VI - 121 C and ISO10993 equivalents

品牌

Parker domnick hunter


Subtle changes to the structure of the hydrophobic PTFE have also resulted in the production of an extremely robust product, now validated for 225 steam sterilization cycles at 142 degrees Celcius (287.6 degrees Fahrenheit). The combination of non-woven supports upstream of the membrane and an expanded net layer downstream provides increased protection and service life while guaranteeing zero fibre shedding into the process.

HIGH FLOW TETPOR II is suitable for all sterile gas applications including fermentation inlet and off-gas streams, venting, lyophilisers, autoclave vacuum breaks and blow-fill-seal equipment as well as the provision of particle-free air within the electronics industry. 

Features and Benefits:

• Steam sterilizable up to 225 cycles at 142 degrees Celsius (287.6 degrees Fahrenheit)

• Unrivalled flow rates combined with low pressure drops

• Fully validated to ASTM 838-05 for liquid bacterial challenge

• Fully validated to aerosol and viral challenge

• Integrity testable by all methods including water intrusion test
浏览 (418) | 评论 (0) | 评分(0) | 支持(0) | 反对(0) | 产品发布:邓德强
将本产品加入收藏
版权所有 Copyright(C)2009-2012 深圳市三荣创新科技有限公司 粤ICP备08026518号-1